Products
Contact UsSliding Door Hardware
1. Environmental-friendly features: powder coating material are environmental-friendly, comply the requirement of prop65 test;
2. Feelings of use: DIY design; convenient for installation; the pulley moves smoothly;
3. Safety design: thick metal profile; comply the requirement of ANSI-BHMA and EN1527 tests; more than 20,000 running test.
When do you need a headboard?
(a). If the studs don’t line up with the pre-drilled holes in the rail. (b). If there is door trim, and “door depth” plus “trim depth” is greater than 2”
How to ensure the stability and safety of the door?
2 Door Stoppers: Tighten down at any point to stop your door exactly, cushioned by rubber caps for a quiet close. 2 Anti-jumpers: go on top of the door and won’t allow door to be lifted off rail. 1 Floor Guide: prevent the door from swinging out or up against the baseboard.
How much space do I need above the doorway?
You will need a minimum of 6" from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.
How thick of a door will this kit work with?
There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below: 2''- door depth - trim depth If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.
our testimonials
What They Say About Our
"We trust Metek, have always had a very good relationship with each of you folks；
Metek is reliable, not only as business partner, but also friends.
You can tackle issues; you can go on and move on.
And that’s what’s we did—together with all Metek!"
"Metek is 10 years old, and we have been working with Metek for more than 8 years.
We still welcome progressing and achieve more than what we did last year.
And it is big achievement, which was done at Metek last ten years.
In the next decade, we will keep going and develop the Australian market together."
"To all Metek members
We now work six years together,we still grow together with Metek, with one of our best suppliers in China.
Why are you one of the best?
It’s because you help us to create our market; you help us to create new products; and you help us to get the right quality; you help us to wonder our issues.
You know, you are all very good educators; you understand our language; you understand us as customer.
And I think that makes the partnership show you are together.
And I hope for the next years, we can still work together, and move on together into your future creative, beautiful products."
